This kit allows you to retrofit a reverse camera to your Intellilink R4.0 system. 

In order to fit the camera, we will need to program your Intellilink R4.0 radio to accept the input of the reverse camera. You must post us your Intellilink R4.0 radio by removing the trims then the unit from the dashboard,  we then return the radio to you fully programmed with the adapter and camera kit.

What's included in the kit?

1. 1x Reverse camera
2. 1x 10m video/power loom
3. Programming of the Intellilink R4.0 unit

What type of camera will you supply/fit?

The camera we supply with the kit mounts directly between the number plate lamps, exactly as the OEM camera does. The kit includes a single hole saw, using an electric drill, you cut a circle hole directly between the number plate lamps, push the cable through the hole, then secure the camera by pushing it into the hole, the camera will then lock into position.

You then push the cable through the rubber vent at the back right hand side of the vehicles body. 

Please note! The reverse guide lines on the camera are exactly as they are named, only a guide. This means that they are simply an aid to the direction of your steering wheel and are not designed to indicate the width of the vehicle, it is also important to note that these will differ to a genuine camera, as we use an aftermarket camera.

PLEASE NOTE!

As with all DIY / RETROFIT KITS, being unable to fit the kit, or lacking the skills to remove the module etc will not be refunded. Please only order this kit if you are 100% confident you can remove the module, post us it and fit the kit.